ZENEC, ZE-RCE6102 rear view camera

Multimedia specialists, the ZENEC company, have more than 20 rear view cameras in their list of multimedia accessories for many cars manufactured in Europe. The camera installs in minutes by replacing the factory number plate light bulb socket. There is no need to cut or drill anything during installation - simply remove the number plate light bulb socket, replace it with a bulb socket with a camera, run the cable to the multimedia/navigation system and the installation is complete - it just couldn't be easier! The car retains its original appearance, and the changes made are completely imperceptible. You have to admit that installing a rear view camera in a car simply cannot be faster and easier than the mentioned option. ZENEC cameras can be connected to all multimedia and navigation systems and monitors with a rear view camera input. These integrated cameras ensure a clear and high-definition image, even in the most adverse environmental conditions, giving the driver excellent visibility to the rear of the car at all times. When reverse gear is engaged, the camera turns on automatically and transmits the image directly to the screen of the multimedia or navigation system. This is especially helpful in the case of poor and limited visibility at the rear of the car. The ZENEC company uses only the best quality components when assembling these cameras, such as the highest quality MPEG chip, which guarantees excellent processing of the transmitted signal - the displayed image is transmitted quickly and without additional "noise" of the video signal, even in low light conditions. Regardless of the signal processing, the quality of the transmitted image is highly dependent on the characteristics of the camera's image sensor. All ZENEC cameras use CMOS image sensors, which are less "noisy" than CCD sensors in low light. In addition, the operating temperature range of CMOS image sensors is significantly wider, which is why they are the choice for creating video cameras for cars. The Sharp CMOS image sensors used in ZENEC products not only ensure excellent images, but also work even in extreme cold, reaching as low as -20° C. Due to the high sensitivity to light, reaching 0.3 lux, ZENEC cameras guarantee an optimal transmitted image signal at all times - even in low light conditions or at night. Thanks to the high definition, signal-to-noise ratio of more than 45 dB and a wide viewing angle of 170°, you can always be sure of the view behind the car. Technical data: • Camera: 6.4 mm/1/4" CMOS sensor • Resolution: 510 x 496 pixels • TV system: NTSC • Viewing angle: horizontal 170° • Video output resolution: 420 TV of lines • Minimum illumination: 0.3 lux • White balance: automatic • IP protection class: IP66 • Video output: 1.0 Vp-p, 75 Ohm • Power source: DC 12V ± 1V • Operating temperature: -10° C – +50°C • Current consumption: max.80 mA • Relative humidity: 95% max. Suitable for the following cars:

Model/Type	Year of Manufacture
TOYOTA Yaris (XP9)	2008> ;

Manufacturer: ZENEC, Switzerland.